• Have you included your external contact details on this post? Please include your email address and or phone number on your post otherwise non MOA members will not be able to reply to you

Wanted Raymarine RAYSTAR 125 GPS CONNECTING CABLE

Malcolm Wakely

Malcolm Wakely
Member
Has anyone updated their Raymarine system, in particular I require the connecting cable for the Raymarine RAYSTAR 125 GPS antenna/ receiver. The end that has the 5 pin connector with about 2 m of cable. My cable has gone open circuit on the 12 volt connection.

I would be very grateful if there is one available.

Malcolm
 
Malcolm,
If no offers from MOA members, there are a couple available on ebay - but pricey!
 
Last edited:
I have a cable that sounds like it might do that, I think I pulled out of the back of an Axiom chartplotter I didn’t want. The two pluggy ends are connected by 50cm of cable and the big one to the end of the sheathing before the bare ends is about 154.
 

Attachments

  • image.jpg
    image.jpg
    988.1 KB · Views: 131
  • image.jpg
    image.jpg
    2.9 MB · Views: 130
Hello Jeff & Shane

Many thanks for your replies. The "more affordable" ebay cable, I asked if he had checked continuity between each socket pin & wire end, this was not confirmed, the reply being as standard ! I see from the photo that the wires had not been stripped so I guess the continuity has not been checked.

Shane, sorry but this is the wrong 5 pin layout, it is a socket with no centre pin.

I have asked a few local yards electronic engineers if they have kept any, so far no luck there.

Thanks again.

Malcolm
 
Back
Top